How to Setup a Home Network Using a Router
Most homes currently are router linked. The advantages it offers users are some things you should not miss out particularly if you have a myriad of PCs at your home. And how to setup a home network using a router is simple when you follow an easy guideline to do this.
Initially, obtain a reliable router. For use at home, it does not need to be extremely fancy and costly. The higher priced brands are more appropriate to workplace settings because it has more safety features and more features. Additionally, you can choose at this point which kind of router you can use on how to setup a home network using a router. Of course, it has to be suitable for your Internet access.
Step 1: Turn all your equipments first to be ready for setup. In case you have an external modem, obtain an Ethernet cable and link one end to the modem and the other end to the router. Acquire another Ethernet wire and connect one end to the router and a second end behind your pc.
Step 2: Next switch on your modem, your router after that the PC for last. Allow a few minutes for the modem and the router to begin getting internet signals and adapting.
Step 3: Configure router options. Put in start-up wizard disk in your base computer’s CD-ROM. It is going to assist you through the procedure of setting it up. Start your web browser and enter IP address. When you are already in the web page, it will prompt for a username and password. You may key in pre-defined username and password settings contained in the manual.
Step 4: Enter IP address, subnet mask and all the needed things it want. Take this time to create your network much more safe. You have to change password and SSID configuration settings to make it a lot more hacker-proof.